Parker IntraFlow Modular
System |
| 
Parker IntraFlow substrate fittings have been developed
specifically for analytical, lab and other complex general purpose
instrumentation flow control systems. ISA/ANSI SP76.00.02 compliant,
Parker IntraFlow fittings provide maximum flexibility with minimal
space requirements. All flowpaths, regardless of direction, are
maintained on a single plane within the system as there are no
lower level manifold blocks required. Contiguous fitting flow
paths are intra-connected with slip fit pressure connectors, while
a threaded pegboard provides connection force and rigidity when
fittings are mounted with cap screws. System assembly couldn't
be simpler: a 5/32" hex head wrench is all you need to build with
Parker IntraFlow.
Design Features
- System size is reduced as much as 75% compared with conventionally
plumbed systems, drastically reducing panel space, internal
volume and purge times
- Compliant with ISA/ANSI SP76.00.02 open architecture standards
- Complex system assembly was never easier! No tube benders
or cutters required, and no welding. All that's needed to assemble
is a 5/32" hex head wrench!
- Every component on your Parker IntraFlow system can be reused
when upgrading with emerging NeSSI Generation 2 & 3 technologies
- All flow paths are on the same plane: Parker IntraFlow eliminates
lower level manifolds to minimize system weight and leak potentials
- Whether mounting a fitting to the standard 1/8" pegboard or
a valve to the fitting, the same 10-32 x 1/2" SHCS is the only
screw required
(For more information, please refer to
Parker IntraFlow Modular System Catalog) |
