Industrial Products >> Flared Fittings

JIS Adapters

Adaptor unions provide female pipe swivel connections for use with male pipe or NPT/NPTF hose ends with a 30 degree female seat. The adapter unions include female pipe swivel fittings with NPTF (Dryseal) male or female pipe ends. Pipe thread connections are used in a wide variety of applications and provide reliable metal to metal sealing. Because of the tapered NPTF thread design, pipe thread connections are not recommended for applications that require repeated re-assembly or precise orientation of the fitting after tightening. For these applications, use of the SAE adjustable O-ring stud end is recommended.

For more information on adapter unions, please refer to the:

• Carbon Steel Union Adapter Catalog
  
• Stainless Steel Union Adapter Catalog

O-Ring Face Seal

O-ring face seal fittings are intended for general application in industrial and commercial hydraulic systems, where the use of elastomeric seals is acceptable to prevent leakage. These fittings are capable of operating at working pressures from 28 in. Hg vacuum to 6000 psi. Fitting styles are available to provide connections between tubing, male and female NPTF pipe and SAE J1926/1/ISO-11926-1 O-ring ports.

O-ring Face Seal fittings are typically joined to tubing by means of a braze on tube sleeve and tube nut. Tube preparation and brazing processes follow standard industry practices for high quality braze joints. The design of O-ring Face Seal fitting tube end is identical for either inch or metric tubing.

For more information, please refer to the O-Ring Face Seal Tube Fitting Catalog.

Carbon Steel Hydraulic Tube Fittings

37 degree flared tube fittings provide leakproof, full flow connections in hydraulic systems. A large variety of fitting styles are available to allow connection of flared tube ends, machined male or female 37 degree ends or make or female NPTF pipe or hose ends. Also included in this section are low-pressure beaded hose stem fittings.

37 degree flared fittings are the most commonly used tube connection in worldwide use today. Tube preparation and flaring processes are easily accomplished with either hand or power tools. The large variety of fitting configurations and jump sizes available provide for simplified fabrication requirements and reduced parts count in complex systems. The design of the 37 degree flared fitting tube end is identical for either inch or metric tubing.

For more information, please refer to Carbon Steel 37 Degree Tube Fitting Catalog.

Stainless Steel Hydraulic Tube Fittings

37 degree flared tube fittings provide leakproof, full flow connections in hydraulic systems. A large variety of fitting styles are available to allow connection of flared tube ends, machined male or female 37 degree ends or make or female NPTF pipe or hose ends. Also included in this section are low-pressure beaded hose stem fittings.

37 degree flared fittings are the most commonly used tube connection in worldwide use today. Tube preparation and flaring processes are easily accomplished with either hand or power tools. The large variety of fitting configurations and jump sizes available provide for simplified fabrication requirements and reduced parts count in complex systems. The design of the 37 degree flared fitting tube end is identical for either inch or metric tubing.

For more information, please refer to Stainelss Steel 37 Degree Tube Fitting Catalog.

Flare-O Hydraulic Fitting

37 degree Flare-O tube fittings provide leakproof, full flow connections in hydraulic systems. A broad range of fitting styles are available which include 37 degree Flare-O tube ends, bulkheads, female 37 degree swivel ends and make or female NPTF pipe ends.

37 degree flared fittings are the most commonly used tube connection in worldwide use today. The addition of an O-Ring in the 37 degree male sealing surface provides a leak proof, drop in replacement for standard 37 degree SAE/JIC/ISO tube fittings. Tube preparation and flaring processes are easily accomplished with either hand or power tools. The large variety of fitting configurations and jump sizes available provides for simplified fabrication requirements and reduced part counts in complex systems. The design of the 37 degree Flare-O fitting tube end is identical for either inch or metric tubing.

For more information, please refer to Flare-O 37 Degree Tube Fitting Catalog.

Back to Industrial Products